Equipment

For the handling and maintenance of our products we offer a comprehensive equipment program from one source.

Dosing systems

For dosing and proportional mixing of coolants due to new filling and top-up with water Oemeta offers high quality Dosatron products. Installed directly in the water supply line, the Dosatron pump operates by using water pressure as its sole power source. The water activates the Dosatron, which takes up the required percentage of concentrate directly from the container and injects it into the water. Inside the Dosatron, the concentrate is mixed with the water, and the water pressure forces the solution downstream. The dose of concentrate will be directly proportional to the volume of water entering the Dosatron. This ensures a constant mixing ratio of the fresh emulsion. Oemeta offers different Dosatron pumps, according to the special requirements. Our technical department will help you to find the Dosatron pump which is suitable for your application.

Oil Skimmers

Oil skimmers remove floating tramp oils and impurities from surfaces of coolants and other fluids. Oemeta offers a range of products (band skimmers and tube skimmers) for different requirements. Our experts will gladly advice you on your selection of a suitable oil skimmer.

Refractometer

Hand refractometers are used for quick and precise determination of the concentration of coolant emulsions. The refractive index of a specific liquid is determined by optical measurement with the refractometer.

Test Strips

For the monitoring and controlling of cutting fluids Oemeta offers the following test strips:

  • Nitrate-Strips
  • Nitrite-Strips
  • Total Hardness-Strips
  • pH-Strips
  • Test strips do determine the concentration of ADDITIV ET and BF concentration in HYCUT two-component emulsions

Determination of the Concentration of Water Solubilised Oils by Acidimetric Titration

The Oemeta Test Kit enables every user of water miscible cutting fluids to determine accurately and on the spot the concentration. This easy and low cost possibility of determining the concentration helps you to control your used emulsion /-solution. Only the optimum concentration for your special operation ensures excellent manufacturing results, economic efficiency and best health and safety conditions at the work place.

Oemeta Analytical Test Case

During usage, the coolant is subjected to permanent external influences. Impurities are carried in, e.g. hydraulic and glide way oils, salts, preservatives and waste substances. Coolant ingredients are dragged out by the chips. The Oemeta analytical test case contains the most important tools to determine changes in the overall system, thus necessary action can be taken. For this reason the case is an important aid for the coolant maintenance. For your individual questions or information requests concerning our products please mail to: products(at)oemeta.com